MKS MultiGas™ 2030 CEM is an FTIR-based gas analyzer designed for continuous monitoring of emissions in effluent streams containing up to 40% of water. Permanently stored calibration spectra reduces the need for costly reference gas mixtures.
MultiGas™ 2030 analyzer contains a 2102 Process FTIR Spectrometer, a patented, high-optical-throughput sampling cell, applications-specific analysis software, and an instrument-independent, quantitative spectral library. It incorporates a novel long wavelength thermoelectrically (TE) cooled detector for more accurate, highly sensitive measurement of most gases and vapors in high moisture streams (up to 40%), producing high resolution spectra (0.5cm-1), enabling detection and measurement of components such as SO2, NO2 and NO, without removing the moisture.
Features & Benefits:
Measures most target emissions with no additional analyzers required.
Direct analysis in streams that contain up to 40% water, with no chillers or driers required.
Permanent calibration spectra reduces the need for costly calibration gas cylinders.
Linearized detector response ensures all instruments maintain the same calibration.
Low cost of ownership, easy to install and maintain.
Applications:
Cement Kilns
Waste Incinerators
Power Plants
Large Combustion Plants
Turbine Engines
FTIR Recipes
The rental MKS FTIR analyzer is equipped with the following recipes for industrial sources:
Cement testing R3
Cylinders R3
CNG Low NMNEHC (<500ppm C)
CNG LPG High NMNEHC (>500ppm C)
Coal EGU Testing R3
NG Engines 7u R3
NG Engines R3
NG Turbines R3
QuadJ QuadZ R3
QuadJ QuadZ 2-stroke R3
Performance
H4 0-21 ppm, 0-15 mg/m3
CH4 0-70 ppm, 0-50 mg/m3
CO 0-60 ppm, 0-75 mg/m3
CO 0-120 ppm, 0-150 mg/m3
CO 0-1200 ppm, 0-1500 mg/m3
CO2 25%
H2O 40%
HCl 0-9 ppm, 0-15 mg/m3
HCl 0-55 ppm, 0-90 mg/m3
HCl 0-123 ppm, 0-200 mg/m3
HF 0-11 ppm, 0-10 mg/m3
N2O 0-26 ppm, 0-50 mg/m3
N2O 0-51 ppm, 0-100 mg/m3
N2O 0-255 ppm, 0-500 mg/m3
NH3 0-13 ppm, 0-10 mg/m3
NH3 0-99 ppm, 0-75 mg/m3
NO 0-149 ppm, 0-200 mg/m3
NO 0-299 ppm, 0-400 mg/m3
NO 0-1119 ppm, 0-1500 mg/m3
NO2 0-24 ppm, 0-50 mg/m3
NO2 0-49 ppm, 0-100 mg/m3
NO2 0-488 ppm, 0-1000 mg/m3
SO2 0-26 ppm, 0-75 mg/m3
SO2 0-105 ppm, 0-300 mg/m3
SO2 0-699 ppm, 0-2000 mg/m3
Detection Limits
CH4 0.3 ppm
CO 0.5 ppm
CO2 0.025%
H2O 0.25%
HCl 0.20 ppm
HF 0.25 ppm
N2O 0.1 ppm
NH3 0.35 ppm
NO 0.5 ppm
NO2 0.4 ppm
