MKS MultiGas™ 2030 CEM is an FTIR-based gas analyzer designed for continuous monitoring of emissions in effluent streams containing up to 40% of water. Permanently stored calibration spectra reduces the need for costly reference gas mixtures.
MultiGas™ 2030 analyzer contains a 2102 Process FTIR Spectrometer, a patented, high-optical-throughput sampling cell, applications-specific analysis software, and an instrument-independent, quantitative spectral library. It incorporates a novel long wavelength thermoelectrically (TE) cooled detector for more accurate, highly sensitive measurement of most gases and vapors in high moisture streams (up to 40%), producing high resolution spectra (0.5cm-1), enabling detection and measurement of components such as SO2, NO2 and NO, without removing the moisture.
Features & Benefits:
Measures most target emissions with no additional analyzers required.
Direct analysis in streams that contain up to 40% water, with no chillers or driers required.
Permanent calibration spectra reduces the need for costly calibration gas cylinders.
Linearized detector response ensures all instruments maintain the same calibration.
Low cost of ownership, easy to install and maintain.
Large Combustion Plants
The rental MKS FTIR analyzer is equipped with the following recipes for industrial sources:
Cement testing R3
CNG Low NMNEHC (<500ppm C)
CNG LPG High NMNEHC (>500ppm C)
Coal EGU Testing R3
NG Engines 7u R3
NG Engines R3
NG Turbines R3
QuadJ QuadZ R3
QuadJ QuadZ 2-stroke R3