:: AMP-Cherokee - VIG Model-210 Heated Methane / Ethane /NonMethane-Ethane Total Hydrocarbon Analyzer (NMHC) ::

VIG Model-210 Heated Methane/Ethane/NonMethane-Ethane
Total Hydrocarbon Analyzer (NMHC)

The VIG Industries, Inc. Model-210 is a microprocessor based, oven heated methane /ethane/nonmethane-ethane/total hydrocarbon gas analyzer designed for high accuracy, sensitivity and stability. The Model-210 uses two independent flame ionization detectors (FIDs), one to measure total hydrocarbons and the second coupled with a GC Column for the separation of the methane, ethane and nonmethane-ethane components. A sample is fed to the analyzer via an internal heated pump to the first FID for a real time total hydrocarbon reading. A portion of the sample is trapped and pushed through a column to separate the methane and ethane components and then to the second FID. Any remaining sample in the column is back flushed through the column to obtain the nonmethane-ethane components. All components that come in contact with the sample through analysis are maintained in a temperature-controlled oven to prevent condensation, and to provide repeatable, reliable performance in the analysis of a wide variety of hydrocarbon concentrations in gaseous mixtures or in ambient air.

The VIG Model 210 THC/Methane/Ethane analyzer employs two heated flame ionization detectors. One detector measures total hydrocarbons continuously; the second detector is coupled to a GC column for the separation of the methane, ethane and non-methane-ethane components. A sample is injected into the column and the methane component passes through to the detector; the ethane component then follows through to the detector for analysis. The remaining sample is then back flushed through the column and to the detector to obtain the non-methane/ethane portion of the sample. Sample loop duration is approximately 3 minutes.

Ranges	0-10, 100, 1000, 10000 ppm OR 0-100, 1000, 10000, 100000 ppm (specify)
Detection Method	FID and FID/GC
Sample Gas Input	1/4-inch Tube; 4 lpm
Analog Outputs	0-10 Vdc, 4-20mA (please specify if desired)

Options
• Zero and calibration solenoids with software
• RS-232 interface
• Internal combustion air supply

Specifications

Analysis Method	Flame Ionization Detector (FID)
Separation Method	Column
Precision	+/- 1% of Full Scale
Response Time	Total Hydrocarbons - Within 5 seconds to 90% of final reading (continuous real time reading) Methane - Approximately 40 seconds, updated every 3 minutes Ethane - Approximately 55 seconds, updated every 3 minutes Non methane - Approximately 90 seconds, updated every 3 minutes
Zero Drift	+/- 1% of Full Scale Per 24 Hours
Span Drift	+/- 1% of Full Scale Per 24 Hours
Linearity	Within 1%
Oxygen Synergism	Within 1% of Selected Range
Ranges	Standard Ranges (4 Ranges per amplifier, two amplifiers per analyzer, one amplifier for total hydrocarbons, one amplifier for methane, ethane and non methane-ethane) 0-100, 1000, 10000, 100000ppm (LDL 0.1ppm) 0-10, 100, 1000, 10000ppm (LDL 0.01ppm)
Display	Backlit Digital / Graphical LCD
Outputs	0-1, 5, or 10 Volts and 4-20mA.
Alarms	Flame Out & Concentration, Latching
Safety	Flame Out Indicator with Fuel Shut-Off System
Oven Temperature	Operating Temperature 275°F, Adjustable 200 to 300°F
Sample Pump	Heated 4 Liters/Minute standard or Heated 14 Liters/Minute optional
Ignition	Automatic (can be set to manual by operator)
Glow Plug	Main and spare glow plug, selectable by switch on back panel
Dimensions	19" front panel, 16.75" wide chassis, 18" deep chassis, 21" deep with fittings and handles, 9" high
Weight	55 to 65 pounds depending on options

For availability and recommendations, please call us at 800.399.4236 or email a Sales Engineer.
Or click on the RFQ link to submit project details.