CEMS & FTIR Continuous Emissions Monitoring System Rentals
for THC, NOx, SO2, CO, CO2 & O2



Climate Controlled CEMS
- Multiple Component Configurations
- Local & Remote Access
- Sampling Accessories Available
- Auto Daily Calibration
- 220V & Sheltered Environment Req'd
Hot/Wet + Dry CEMS
- Multiple Component Configurations
- Local & Remote Access
- Sampling Accessories Available
- Auto Daily Calibration
- 110V & Sheltered Environment Req'd
Climate Controlled Mobile CEMS
- Multiple Component Configurations
- Local & Remote Access
- Sampling Accessories Available
- Auto Daily Calibration
- 220V & Sheltered Environment Req'd
Mobile FTIR CEMS Cart
- Wet O2 Available
- Local & Remote Access
- Sampling Accessories Available
- Auto Daily Calibration
- 110V, Compressed Nitrogen & Liquid Nitrogen Req'd


CEMS Rental Systems
AMP-Cherokee CEMS Rental Systems are available for a variety of applications - dry and hot/wet monitoring for stationary or mobile plant locations. Our CEMS systems are configured for ready installation at your monitoring site. Maintenance and installation can be provided.

FTIR Analyzer & Automated Cart Rentals

MKS MG2030 FTIR Analyzer
MultiGas 2030 FTIR Analyzers are capable of ppb sensitivity for multiple gas species in automotive emissions measurement, stack emissions monitoring, process monitoring, ambient air monitoring, and selective catalytic reduction performance.
In gas streams with up to 40% water, MultiGas 2030 Analyzers can simultaneously analyze and display more than 30 gases. Fully automated MultiGas 2030 Analyzer are easy to operate and maintain.The MultiGas™ 2030 CEM is utilized in our FTIR-based CEMS Cart to measure emissions from stationary sources such as waste incinerators, power plants and cement kilns. It is capable of directly analyzing hot, wet effluent gas streams without the need for sample pre-treatment. It monitors multiple gas components over a wide range of compositions with minimal cross-interference effects from either water (up to 40%) or other potentially interfering species.

Measures most target emissions with no additional analyzers required
Direct analysis in streams that contain up to 40% water, with no chillers or driers required
Permanent calibration spectra reduces the need for costly calibration gas cylinders
Linearized detector response ensures all instruments maintain the same calibration

MAX iR™ FTIR Analyzer & Automated ASC-10 Cart
The MAX-iR™ FTIR Gas Analyzer has been engineered to meet the most demanding standards for in-line process, batch sampling, gas purity/certification, emissions testing, and ambient air monitoring. Combined with Max’s StarBoost™ technology, MAX-iR™ allows users to achieve single digit ppb detection limits while maintaining all of the benefits of real-time FTIR. The MAX-iR™ FTIR Gas Analyzer eliminates the need for costly GC solutions across a wide variety of applications.

• Simultaneous analysis and display of more than 30 gases
• 10-100 ppb sensitivity for many toxic gases without moisture removal,
• Easily transportable from site to site, with set up time in minutes
• Permanent calibrations eliminates the need for costly gas cylinders
• Patented, linearized detector response assures all instruments maintain the same calibration
• User-friendly software for simple operation with minimal training
• Integrated gas cell pressure and temperature monitoring

FTIR Systems:
Download our FTIR CEMS Applications Data

Automated LN2 FTIR Detector Cooling

Our LN2-100R Auto Fill Controller provides automatic or operator initiated refilling of liquid nitrogen (LN2) to the on-board FTIR reservoir, allowing for continuous, unattended operation and enhanced safety.

CEMS and FTIR Operator Training
AMP-Cherokee offers operator training and maintenance for your plant personnel.

Contact AMP-Cherokee today at 919.552.0554 or sales@ampcherokee.com for a free consultation on your emissions monitoring and process performance needs.