AMP-Cherokeestandard heated sample lines include stainless steel over braided TFETeflon tubes for sample extraction and calibration gas injection.Line temperature is regulated via an integral Type K thermocouple andan included digital heat controller. Our heated lines are designed tomaintain 300oF at –20oF ambient temperature and have a maximumtemperature limit of 400oF. All lines are certified clean at <2ppm for both THC (as CH4) and CO prior to shipment. AMP-Cherokeeheated sample lines are available in lengths of 100’, 50’ and25’. Heated lines incorporate a 3/8” Teflon tube for sampletransport and a 1/4” Teflon tube for calibration gastransport. All heated line kits include a 20-amp VentilatedHeat Controller.
Gas Connections 3/8-inch tube (sample), 1/4-inch tube (calibration)Power Requirement 110VAC/60 Hz; 20 amp (100-ft), 15 amp (50-ft), 10-amp (25-ft)Shipping Dim/Wt 100-ft = 35x35x12 – 115 lbs50-ft = 35x35x12 – 70 lbs25-ft = 35x35x12 – 45 lbs35x35x12 – 115 lbsPower Requirements 115 Volts AC Shipping Size & Weight 1 Package / 50-75 lbs
Helpful Hint Sample lines are precleaned prior to each shipment. Gas Chromatograph lines are cleaned down to <2 ppm total hydrocarbons. Please do not leave a line coiled while heating as the overwrap may melt.
Copyright © AMP-Cherokee. All Rights Reserved.| Ecommerce web development company Built with Volusion